Error on installing SP3a - Analysis Services components

While trying to complete the installation of
sql2kasp3.exe, my system gives me the follwoing error -
An error occurred during the move data process - 145
Window header is Severe.
Any ideas?
TIAI did some more looking around and found the Knowledge
Base had an article - 814462 - that addresses this issue.
It recommends fixing a registry key value under
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OLAP
Server\Uninstall Info.
I do not have this entry in my registry.
What's up?
>--Original Message--
>While trying to complete the installation of
>sql2kasp3.exe, my system gives me the follwoing error -
>An error occurred during the move data process - 145
>Window header is Severe.
>Any ideas?
>TIA
>.
>|||Well, like it says to create the registry key value if it doesn't exist, you
can also create the Uninstall Info key itself...
--
Aaron Bertrand
SQL Server MVP
http://www.aspfaq.com/
"Rich Bergstedt" <split_hare@.sbcglobal.net> wrote in message
news:3d4d01c3e300$9ec8f0e0$a501280a@.phx.gbl...
> I did some more looking around and found the Knowledge
> Base had an article - 814462 - that addresses this issue.
> It recommends fixing a registry key value under
> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OLAP
> Server\Uninstall Info.
> I do not have this entry in my registry.
> What's up?
> >--Original Message--
> >While trying to complete the installation of
> >sql2kasp3.exe, my system gives me the follwoing error -
> >An error occurred during the move data process - 145
> >Window header is Severe.
> >
> >Any ideas?
> >
> >TIA
> >.
> >|||Stupid me.
I never installed Analysis Services when I installed the
eval package.
Now, I am working fine thanks.
>--Original Message--
>Well, like it says to create the registry key value if
it doesn't exist, you
>can also create the Uninstall Info key itself...
>--
>Aaron Bertrand
>SQL Server MVP
>http://www.aspfaq.com/
>
>
>"Rich Bergstedt" <split_hare@.sbcglobal.net> wrote in
message
>news:3d4d01c3e300$9ec8f0e0$a501280a@.phx.gbl...
>> I did some more looking around and found the Knowledge
>> Base had an article - 814462 - that addresses this
issue.
>> It recommends fixing a registry key value under
>> HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\OLAP
>> Server\Uninstall Info.
>> I do not have this entry in my registry.
>> What's up?
>> >--Original Message--
>> >While trying to complete the installation of
>> >sql2kasp3.exe, my system gives me the follwoing
error -
>> >An error occurred during the move data process - 145
>> >Window header is Severe.
>> >
>> >Any ideas?
>> >
>> >TIA
>> >.
>> >
>
>.
>

Error on disk move while trying to add SP3a

I am trying to add sp3a to my Sql Server 2000 install.
I have already added sql2ksp3.exe and it installed fine. I get an error
trying to add sql2kasp3.exe. After unpacking and running setup.exe, I
get the error:
"An error occurred during the move process: -145"
There is plenty of room on my disk (about 300 MB).
I get the same error when I run it on different disks. The sql2ksp3.exe
is a much larger release and I had no problem with that one.
I looked on google for this error and I can pleny of docs with the same
error message (except for the -145).
Anyone know what the problem is?
Thanks,
Tom.
Why are you installing SP3a when you already have SP3? Did you read the
release notes?
Why are you installing sql2kasp3.exe? Do you actually have Analysis
Services installed and running? Or did you just grab every single
SP3-related file?
Aaron Bertrand
SQL Server MVP
http://www.aspfaq.com/
"Thomas Scheiderich" <tfs@.deltanet.com> wrote in message
news:408F2721.4090004@.deltanet.com...
>I am trying to add sp3a to my Sql Server 2000 install.
> I have already added sql2ksp3.exe and it installed fine. I get an error
> trying to add sql2kasp3.exe. After unpacking and running setup.exe, I get
> the error:
> "An error occurred during the move process: -145"
> There is plenty of room on my disk (about 300 MB).
> I get the same error when I run it on different disks. The sql2ksp3.exe
> is a much larger release and I had no problem with that one.
> I looked on google for this error and I can pleny of docs with the same
> error message (except for the -145).
> Anyone know what the problem is?
> Thanks,
> Tom.
>
|||Aaron Bertrand [MVP] wrote:

> Why are you installing SP3a when you already have SP3? Did you read the
> release notes?
I didn't have SP3. I had just loaded 2000 on my machine and was just
loading SP3 to bring it up to the correct level.

> Why are you installing sql2kasp3.exe? Do you actually have Analysis
> Services installed and running? Or did you just grab every single
> SP3-related file?
No. I didn't load all the SPs. I didn't load the desktop one. I
loaded the other because the instructions say to use both. I assume I
have the analysis services on my machine as I loaded the full system.
Is this not the case? How do I tell?
Here is the instructions on the MS download page:
************************************************** *********************
Instructions
To install SP3a, follow the installation instructions below. Not all
steps are required, depending on which of the following SQL Server 2000
components or configurations to which the service pack is being applied.
Important: You must upgrade computers running Microsoft Windows XP
to Windows XP Service Pack 1 before applying SQL Server 2000 Service
Pack 3a.
Back up your SQL Server databases.
Back up your Analysis Services databases.
Make sure that the system databases have enough free space.
Minimum of 64 MB of RAM (128 MB or more recommended)
Install Database Components SP3a (SQL2KSP3.exe).
Install Analysis Services Components SP3a (SQL2KASP3.exe).
Restart services and applications.
More detailed instructions can be found at the Product Support Services
Readme .
************************************************** *********************

>
|||Analysis Services is separate. Hopefully, you would know if you installed
Analysis Services. It shouldn't be installed if you're not using it, never
mind if you don't know what it is...
Aaron Bertrand
SQL Server MVP
http://www.aspfaq.com/
"Thomas Scheiderich" <tfs@.deltanet.com> wrote in message
news:408FFA85.2010208@.deltanet.com...
> Aaron Bertrand [MVP] wrote:
>
> I didn't have SP3. I had just loaded 2000 on my machine and was just
> loading SP3 to bring it up to the correct level.
>
> No. I didn't load all the SPs. I didn't load the desktop one. I
> loaded the other because the instructions say to use both. I assume I
> have the analysis services on my machine as I loaded the full system.
> Is this not the case? How do I tell?
> Here is the instructions on the MS download page:
> ************************************************** *********************
> Instructions
> To install SP3a, follow the installation instructions below. Not all
> steps are required, depending on which of the following SQL Server 2000
> components or configurations to which the service pack is being applied.
>
> Important: You must upgrade computers running Microsoft Windows XP
> to Windows XP Service Pack 1 before applying SQL Server 2000 Service
> Pack 3a.
>
> Back up your SQL Server databases.
> Back up your Analysis Services databases.
> Make sure that the system databases have enough free space.
> Minimum of 64 MB of RAM (128 MB or more recommended)
> Install Database Components SP3a (SQL2KSP3.exe).
> Install Analysis Services Components SP3a (SQL2KASP3.exe).
> Restart services and applications.
> More detailed instructions can be found at the Product Support Services
> Readme .
> ************************************************** *********************
>

Error on disk move while trying to add SP3a

I am trying to add sp3a to my Sql Server 2000 install.
I have already added sql2ksp3.exe and it installed fine. I get an error
trying to add sql2kasp3.exe. After unpacking and running setup.exe, I
get the error:
"An error occurred during the move process: -145"
There is plenty of room on my disk (about 300 MB).
I get the same error when I run it on different disks. The sql2ksp3.exe
is a much larger release and I had no problem with that one.
I looked on google for this error and I can pleny of docs with the same
error message (except for the -145).
Anyone know what the problem is?
Thanks,
Tom.Why are you installing SP3a when you already have SP3? Did you read the
release notes?
Why are you installing sql2kasp3.exe? Do you actually have Analysis
Services installed and running? Or did you just grab every single
SP3-related file?
--
Aaron Bertrand
SQL Server MVP
http://www.aspfaq.com/
"Thomas Scheiderich" <tfs@.deltanet.com> wrote in message
news:408F2721.4090004@.deltanet.com...
>I am trying to add sp3a to my Sql Server 2000 install.
> I have already added sql2ksp3.exe and it installed fine. I get an error
> trying to add sql2kasp3.exe. After unpacking and running setup.exe, I get
> the error:
> "An error occurred during the move process: -145"
> There is plenty of room on my disk (about 300 MB).
> I get the same error when I run it on different disks. The sql2ksp3.exe
> is a much larger release and I had no problem with that one.
> I looked on google for this error and I can pleny of docs with the same
> error message (except for the -145).
> Anyone know what the problem is?
> Thanks,
> Tom.
>|||Aaron Bertrand [MVP] wrote:
> Why are you installing SP3a when you already have SP3? Did you read the
> release notes?
I didn't have SP3. I had just loaded 2000 on my machine and was just
loading SP3 to bring it up to the correct level.
> Why are you installing sql2kasp3.exe? Do you actually have Analysis
> Services installed and running? Or did you just grab every single
> SP3-related file?
No. I didn't load all the SPs. I didn't load the desktop one. I
loaded the other because the instructions say to use both. I assume I
have the analysis services on my machine as I loaded the full system.
Is this not the case? How do I tell?
Here is the instructions on the MS download page:
***********************************************************************
Instructions
To install SP3a, follow the installation instructions below. Not all
steps are required, depending on which of the following SQL Server 2000
components or configurations to which the service pack is being applied.
Important: You must upgrade computers running Microsoft® Windows® XP
to Windows XP Service Pack 1 before applying SQL Server 2000 Service
Pack 3a.
Back up your SQL Server databases.
Back up your Analysis Services databases.
Make sure that the system databases have enough free space.
Minimum of 64 MB of RAM (128 MB or more recommended)
Install Database Components SP3a (SQL2KSP3.exe).
Install Analysis Services Components SP3a (SQL2KASP3.exe).
Restart services and applications.
More detailed instructions can be found at the Product Support Services
Readme .
***********************************************************************
>|||Analysis Services is separate. Hopefully, you would know if you installed
Analysis Services. It shouldn't be installed if you're not using it, never
mind if you don't know what it is...
--
Aaron Bertrand
SQL Server MVP
http://www.aspfaq.com/
"Thomas Scheiderich" <tfs@.deltanet.com> wrote in message
news:408FFA85.2010208@.deltanet.com...
> Aaron Bertrand [MVP] wrote:
> > Why are you installing SP3a when you already have SP3? Did you read the
> > release notes?
>
> I didn't have SP3. I had just loaded 2000 on my machine and was just
> loading SP3 to bring it up to the correct level.
> >
> > Why are you installing sql2kasp3.exe? Do you actually have Analysis
> > Services installed and running? Or did you just grab every single
> > SP3-related file?
>
> No. I didn't load all the SPs. I didn't load the desktop one. I
> loaded the other because the instructions say to use both. I assume I
> have the analysis services on my machine as I loaded the full system.
> Is this not the case? How do I tell?
> Here is the instructions on the MS download page:
> ***********************************************************************
> Instructions
> To install SP3a, follow the installation instructions below. Not all
> steps are required, depending on which of the following SQL Server 2000
> components or configurations to which the service pack is being applied.
>
> Important: You must upgrade computers running Microsoft® Windows® XP
> to Windows XP Service Pack 1 before applying SQL Server 2000 Service
> Pack 3a.
>
> Back up your SQL Server databases.
> Back up your Analysis Services databases.
> Make sure that the system databases have enough free space.
> Minimum of 64 MB of RAM (128 MB or more recommended)
> Install Database Components SP3a (SQL2KSP3.exe).
> Install Analysis Services Components SP3a (SQL2KASP3.exe).
> Restart services and applications.
> More detailed instructions can be found at the Product Support Services
> Readme .
> ***********************************************************************
> >
> >
>

Error on disk move while trying to add SP3a

I am trying to add sp3a to my Sql Server 2000 install.
I have already added sql2ksp3.exe and it installed fine. I get an error
trying to add sql2kasp3.exe. After unpacking and running setup.exe, I
get the error:
"An error occurred during the move process: -145"
There is plenty of room on my disk (about 300 MB).
I get the same error when I run it on different disks. The sql2ksp3.exe
is a much larger release and I had no problem with that one.
I looked on google for this error and I can pleny of docs with the same
error message (except for the -145).
Anyone know what the problem is?
Thanks,
Tom.Why are you installing SP3a when you already have SP3? Did you read the
release notes?
Why are you installing sql2kasp3.exe? Do you actually have Analysis
Services installed and running? Or did you just grab every single
SP3-related file?
Aaron Bertrand
SQL Server MVP
http://www.aspfaq.com/
"Thomas Scheiderich" <tfs@.deltanet.com> wrote in message
news:408F2721.4090004@.deltanet.com...
>I am trying to add sp3a to my Sql Server 2000 install.
> I have already added sql2ksp3.exe and it installed fine. I get an error
> trying to add sql2kasp3.exe. After unpacking and running setup.exe, I get
> the error:
> "An error occurred during the move process: -145"
> There is plenty of room on my disk (about 300 MB).
> I get the same error when I run it on different disks. The sql2ksp3.exe
> is a much larger release and I had no problem with that one.
> I looked on google for this error and I can pleny of docs with the same
> error message (except for the -145).
> Anyone know what the problem is?
> Thanks,
> Tom.
>|||Aaron Bertrand [MVP] wrote:

> Why are you installing SP3a when you already have SP3? Did you read the
> release notes?
I didn't have SP3. I had just loaded 2000 on my machine and was just
loading SP3 to bring it up to the correct level.

> Why are you installing sql2kasp3.exe? Do you actually have Analysis
> Services installed and running? Or did you just grab every single
> SP3-related file?
No. I didn't load all the SPs. I didn't load the desktop one. I
loaded the other because the instructions say to use both. I assume I
have the analysis services on my machine as I loaded the full system.
Is this not the case? How do I tell?
Here is the instructions on the MS download page:
****************************************
*******************************
Instructions
To install SP3a, follow the installation instructions below. Not all
steps are required, depending on which of the following SQL Server 2000
components or configurations to which the service pack is being applied.
Important: You must upgrade computers running Microsoft Windows XP
to Windows XP Service Pack 1 before applying SQL Server 2000 Service
Pack 3a.
Back up your SQL Server databases.
Back up your Analysis Services databases.
Make sure that the system databases have enough free space.
Minimum of 64 MB of RAM (128 MB or more recommended)
Install Database Components SP3a (SQL2KSP3.exe).
Install Analysis Services Components SP3a (SQL2KASP3.exe).
Restart services and applications.
More detailed instructions can be found at the Product Support Services
Readme .
****************************************
*******************************

>|||Analysis Services is separate. Hopefully, you would know if you installed
Analysis Services. It shouldn't be installed if you're not using it, never
mind if you don't know what it is...
Aaron Bertrand
SQL Server MVP
http://www.aspfaq.com/
"Thomas Scheiderich" <tfs@.deltanet.com> wrote in message
news:408FFA85.2010208@.deltanet.com...
> Aaron Bertrand [MVP] wrote:
>
>
> I didn't have SP3. I had just loaded 2000 on my machine and was just
> loading SP3 to bring it up to the correct level.
>
>
> No. I didn't load all the SPs. I didn't load the desktop one. I
> loaded the other because the instructions say to use both. I assume I
> have the analysis services on my machine as I loaded the full system.
> Is this not the case? How do I tell?
> Here is the instructions on the MS download page:
> ****************************************
*******************************
> Instructions
> To install SP3a, follow the installation instructions below. Not all
> steps are required, depending on which of the following SQL Server 2000
> components or configurations to which the service pack is being applied.
>
> Important: You must upgrade computers running Microsoft Windows XP
> to Windows XP Service Pack 1 before applying SQL Server 2000 Service
> Pack 3a.
>
> Back up your SQL Server databases.
> Back up your Analysis Services databases.
> Make sure that the system databases have enough free space.
> Minimum of 64 MB of RAM (128 MB or more recommended)
> Install Database Components SP3a (SQL2KSP3.exe).
> Install Analysis Services Components SP3a (SQL2KASP3.exe).
> Restart services and applications.
> More detailed instructions can be found at the Product Support Services
> Readme .
> ****************************************
*******************************
>
>

Error messages in event log - bucket table 5

I keep getting this error in my event log:

Bucket 04944163, bucket table 5, EventType sql90exception, P1 w3wp.exe, P2 6.0.3790.1830, P3 42435be1, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 0f1e826d, P9 00000000, P10 NIL.

SQL server 2005, Windows 2003

I cannot find anything on the web or in help about this - any clues anyone?

What kind of app are you running- a Windows Service, Web Service, etc?|||

Bucket 04944163, bucket table 5, EventType sql90exception, P1 w3wp.exe, P2 6.0.3790.1830, P3 42435be1, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 0f1e826d, P9 00000000, P10 NIL.

This line is information about a crash that was uploaded to Microsoft Watson. Are you using SQL Server 2005 RTM Report Server in an ASP.NET App?

|||I am using SQL 2005 RTM within an ASP page. Our whole reporting server crashed witha refusal to display any reports this morning. No clues as to what was wrong, then it came up - no rhyme nor erason to it. Anyone have any ideas?

Error messages in event log - bucket table 5

I keep getting this error in my event log:

Bucket 04944163, bucket table 5, EventType sql90exception, P1 w3wp.exe, P2 6.0.3790.1830, P3 42435be1, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 0f1e826d, P9 00000000, P10 NIL.

SQL server 2005, Windows 2003

I cannot find anything on the web or in help about this - any clues anyone?

What kind of app are you running- a Windows Service, Web Service, etc?|||

Bucket 04944163, bucket table 5, EventType sql90exception, P1 w3wp.exe, P2 6.0.3790.1830, P3 42435be1, P4 sqldumper_unknown_module.dll, P5 0.0.0.0, P6 00000000, P7 0, P8 0f1e826d, P9 00000000, P10 NIL.

This line is information about a crash that was uploaded to Microsoft Watson. Are you using SQL Server 2005 RTM Report Server in an ASP.NET App?

|||I am using SQL 2005 RTM within an ASP page. Our whole reporting server crashed witha refusal to display any reports this morning. No clues as to what was wrong, then it came up - no rhyme nor erason to it. Anyone have any ideas?

Error message

I have installed the the MSSQL Server 2000 along with its
service pack 2. However, I am getting an error message
(pop window) that says:
isqlw.exe - Ordinal Not Found
"The ordinal 29 could not be located in the dynamic link
library odbcbcp.dll"
Please help me resolve this issue.
ThanksThe error is usually caused by MDAC issues (mismatched
dlls). Try applying the latest service pack (SP3a) or
reapply you mdac version. You can check versions with the
component checker. The component check and recent MDAC
versions are available for download from:
http://msdn.microsoft.com/data/mdac/default.aspx
-Sue
On Thu, 22 Apr 2004 13:06:36 -0700, "Ashraf"
<anonymous@.discussions.microsoft.com> wrote:

>I have installed the the MSSQL Server 2000 along with its
>service pack 2. However, I am getting an error message
>(pop window) that says:
>isqlw.exe - Ordinal Not Found
>"The ordinal 29 could not be located in the dynamic link
>library odbcbcp.dll"
>Please help me resolve this issue.
>Thanks
>

Error message

I have installed the the MSSQL Server 2000 along with its
service pack 2. However, I am getting an error message
(pop window) that says:
isqlw.exe - Ordinal Not Found
"The ordinal 29 could not be located in the dynamic link
library odbcbcp.dll"
Please help me resolve this issue.
Thanks
The error is usually caused by MDAC issues (mismatched
dlls). Try applying the latest service pack (SP3a) or
reapply you mdac version. You can check versions with the
component checker. The component check and recent MDAC
versions are available for download from:
http://msdn.microsoft.com/data/mdac/default.aspx
-Sue
On Thu, 22 Apr 2004 13:06:36 -0700, "Ashraf"
<anonymous@.discussions.microsoft.com> wrote:

>I have installed the the MSSQL Server 2000 along with its
>service pack 2. However, I am getting an error message
>(pop window) that says:
>isqlw.exe - Ordinal Not Found
>"The ordinal 29 could not be located in the dynamic link
>library odbcbcp.dll"
>Please help me resolve this issue.
>Thanks
>