Error on Passing parameter to stored procedure

Hi,

I have a procedure that will save to table in sql server 200 via stored procedure. When I hit the save button it alwasy give me an error saying "Procedure 'sp_AddBoard' expects parameter '@.dtmWarrantyStart', which was not supplied" even though I supplied it in the code

which is

Dim ParamdtmWarrantyStart As SqlParameter = New SqlParameter("@.dtmWarrantyStart", SqlDbType.datetime, 8)
ParamdtmWarrantyStart.Value = dtmWarrantyStart
myCommand.Parameters.Add(ParamdtmWarrantyStart)

below is the stored procedure.

create Proc sp_AddBoard(@.BrandID int,
@.strPcName varchar(50),
@.bitAccounted bit,
@.dtmAccounted datetime,
@.dtmWarrantyStart datetime,
@.dtmWarrantyEnd datetime,
-- @.strDescription varchar(500),
@.intStatus int,
@.ModelNo varchar(50),
@.intMemorySlots int,
@.intMemSlotTaken int,
@.intAgpSlots int,
@.intPCI int,
@.bitWSound bit,
@.bitWLan bit,
@.bitWVideo bit,
@.dtmAcquired datetime,
@.stat bit output,
@.intFSB int) as
if not exists(select strPcName from tblBoards where strPcName=@.strPcName)
begin
insert into tblBoards
(BrandID, strPcName, bitAccounted,
dtmAccounted, dtmWarrantyStart,
dtmWarrantyEnd, --strDescription,
intStatus,
ModelNo, intMemorySlots, intMemSlotTaken,
intAgpSlots, intPCI, bitWLan,
bitWVideo, dtmAcquired,intFSB,bitWSound)

values

(@.BrandID,@.strPcName,@.bitAccounted,
@.dtmAccounted,@.dtmWarrantyStart,
@.dtmWarrantyEnd,--@.strDescription,
@.intStatus,
@.ModelNo,@.intMemorySlots,@.intMemSlotTaken,
@.intAgpSlots,@.intPCI,@.bitWLan,
@.bitWVideo,@.dtmAcquired,@.intFSB,@.bitWSound)
end
else
begin
set @.stat=1
end

The table is also designed to accept nulls on that field but still same error occured.

Please helpjust check if there is any value in the parameter value. the way i normally do is :

myCommand.Parameters.Add(New SqlParameter("@.cusbday",SqlDbType.datetime))
If len(trim(bday.Text)) = 0 Then
myCommand.Parameters("@.cusbday").Value = SqlDateTime.null
Else
myCommand.Parameters("@.cusbday").Value = DateTime.Parse(bday.Text)
End If

also you need to import the namespace System.Data.SqlTypes to use sqldatetime.null

<%@. import Namespace="System.Data.SqlTypes" %>

hthsql

Error message when trying to save modified maintenance plan?

I have a maintenance plan created that have been running for a few months.
Now I want to modify the plan and selected Modify on the plan and got into
an editor with the different steps. I selected "Edit" on the Backup step and
changed the name of the destination folder and clicked OK in that dialog.
When I try to save the modified maintenance plan, I only get an error dialog
with "No description found".
What is the problem?
OlavHi
I am not sure about the error, you may want to use SQL Profiler to find the
statement causing the error and try to run this manually. The quickest
solution may be to drop the maintenance plan and re-create it from scratch.
John
"Olav" wrote:

> I have a maintenance plan created that have been running for a few months.
> Now I want to modify the plan and selected Modify on the plan and got into
> an editor with the different steps. I selected "Edit" on the Backup step a
nd
> changed the name of the destination folder and clicked OK in that dialog.
> When I try to save the modified maintenance plan, I only get an error dial
og
> with "No description found".
> What is the problem?
> Olav
>
>|||I have the same problem when I try to modify a maintenance plan and then sav
e
the changes I get an error message saying "No description found" - this even
happens when I try to rename the maintenance plan. The changes are not save
d
and the maintenance plan executes ok.
I can create new plans using the wizard but not from scratch. I have
upgraded to SP1 (9.00.2047.00, SP1, Standard Edition running on Win2003 SP1)
Recreating maintenance plans each time I want to modify them is not an optio
n.
Does any one have a solution ?
"John Bell" wrote:
[vbcol=seagreen]
> Hi
> I am not sure about the error, you may want to use SQL Profiler to find th
e
> statement causing the error and try to run this manually. The quickest
> solution may be to drop the maintenance plan and re-create it from scratch
.
> John
> "Olav" wrote:
>|||Hi
Are you seeing this error? http://tinyurl.com/mj88y
John
"Bridgepark" wrote:
[vbcol=seagreen]
> I have the same problem when I try to modify a maintenance plan and then s
ave
> the changes I get an error message saying "No description found" - this ev
en
> happens when I try to rename the maintenance plan. The changes are not sa
ved
> and the maintenance plan executes ok.
> I can create new plans using the wizard but not from scratch. I have
> upgraded to SP1 (9.00.2047.00, SP1, Standard Edition running on Win2003 SP
1)
> Recreating maintenance plans each time I want to modify them is not an opt
ion.
> Does any one have a solution ?
> "John Bell" wrote:
>|||I see the "No description found" message but I have plans without Cleanup
tasks in them. I tried creating a new plan without using the wizard and whe
n
I try and save it I get the error. If I create a plan using the Wizard its
fine (even if it has a clean up task) However if I then try and alter the
plan I get the message.
"John Bell" wrote:
[vbcol=seagreen]
> Hi
> Are you seeing this error? http://tinyurl.com/mj88y
> John
> "Bridgepark" wrote:
>|||Hi
You may have to log a call with PSS.
John
"Bridgepark" wrote:
[vbcol=seagreen]
> I see the "No description found" message but I have plans without Cleanup
> tasks in them. I tried creating a new plan without using the wizard and w
hen
> I try and save it I get the error. If I create a plan using the Wizard it
s
> fine (even if it has a clean up task) However if I then try and alter the
> plan I get the message.
> "John Bell" wrote:
>

Error message when trying to save modified maintenance plan?

I have a maintenance plan created that have been running for a few months.
Now I want to modify the plan and selected Modify on the plan and got into
an editor with the different steps. I selected "Edit" on the Backup step and
changed the name of the destination folder and clicked OK in that dialog.
When I try to save the modified maintenance plan, I only get an error dialog
with "No description found".
What is the problem?
OlavHi
I am not sure about the error, you may want to use SQL Profiler to find the
statement causing the error and try to run this manually. The quickest
solution may be to drop the maintenance plan and re-create it from scratch.
John
"Olav" wrote:
> I have a maintenance plan created that have been running for a few months.
> Now I want to modify the plan and selected Modify on the plan and got into
> an editor with the different steps. I selected "Edit" on the Backup step and
> changed the name of the destination folder and clicked OK in that dialog.
> When I try to save the modified maintenance plan, I only get an error dialog
> with "No description found".
> What is the problem?
> Olav
>
>|||I have the same problem when I try to modify a maintenance plan and then save
the changes I get an error message saying "No description found" - this even
happens when I try to rename the maintenance plan. The changes are not saved
and the maintenance plan executes ok.
I can create new plans using the wizard but not from scratch. I have
upgraded to SP1 (9.00.2047.00, SP1, Standard Edition running on Win2003 SP1)
Recreating maintenance plans each time I want to modify them is not an option.
Does any one have a solution ?
"John Bell" wrote:
> Hi
> I am not sure about the error, you may want to use SQL Profiler to find the
> statement causing the error and try to run this manually. The quickest
> solution may be to drop the maintenance plan and re-create it from scratch.
> John
> "Olav" wrote:
> > I have a maintenance plan created that have been running for a few months.
> >
> > Now I want to modify the plan and selected Modify on the plan and got into
> > an editor with the different steps. I selected "Edit" on the Backup step and
> > changed the name of the destination folder and clicked OK in that dialog.
> >
> > When I try to save the modified maintenance plan, I only get an error dialog
> > with "No description found".
> >
> > What is the problem?
> >
> > Olav
> >
> >
> >|||Hi
Are you seeing this error? http://tinyurl.com/mj88y
John
"Bridgepark" wrote:
> I have the same problem when I try to modify a maintenance plan and then save
> the changes I get an error message saying "No description found" - this even
> happens when I try to rename the maintenance plan. The changes are not saved
> and the maintenance plan executes ok.
> I can create new plans using the wizard but not from scratch. I have
> upgraded to SP1 (9.00.2047.00, SP1, Standard Edition running on Win2003 SP1)
> Recreating maintenance plans each time I want to modify them is not an option.
> Does any one have a solution ?
> "John Bell" wrote:
> > Hi
> >
> > I am not sure about the error, you may want to use SQL Profiler to find the
> > statement causing the error and try to run this manually. The quickest
> > solution may be to drop the maintenance plan and re-create it from scratch.
> >
> > John
> >
> > "Olav" wrote:
> >
> > > I have a maintenance plan created that have been running for a few months.
> > >
> > > Now I want to modify the plan and selected Modify on the plan and got into
> > > an editor with the different steps. I selected "Edit" on the Backup step and
> > > changed the name of the destination folder and clicked OK in that dialog.
> > >
> > > When I try to save the modified maintenance plan, I only get an error dialog
> > > with "No description found".
> > >
> > > What is the problem?
> > >
> > > Olav
> > >
> > >
> > >|||I see the "No description found" message but I have plans without Cleanup
tasks in them. I tried creating a new plan without using the wizard and when
I try and save it I get the error. If I create a plan using the Wizard its
fine (even if it has a clean up task) However if I then try and alter the
plan I get the message.
"John Bell" wrote:
> Hi
> Are you seeing this error? http://tinyurl.com/mj88y
> John
> "Bridgepark" wrote:
> > I have the same problem when I try to modify a maintenance plan and then save
> > the changes I get an error message saying "No description found" - this even
> > happens when I try to rename the maintenance plan. The changes are not saved
> > and the maintenance plan executes ok.
> > I can create new plans using the wizard but not from scratch. I have
> > upgraded to SP1 (9.00.2047.00, SP1, Standard Edition running on Win2003 SP1)
> > Recreating maintenance plans each time I want to modify them is not an option.
> >
> > Does any one have a solution ?
> >
> > "John Bell" wrote:
> >
> > > Hi
> > >
> > > I am not sure about the error, you may want to use SQL Profiler to find the
> > > statement causing the error and try to run this manually. The quickest
> > > solution may be to drop the maintenance plan and re-create it from scratch.
> > >
> > > John
> > >
> > > "Olav" wrote:
> > >
> > > > I have a maintenance plan created that have been running for a few months.
> > > >
> > > > Now I want to modify the plan and selected Modify on the plan and got into
> > > > an editor with the different steps. I selected "Edit" on the Backup step and
> > > > changed the name of the destination folder and clicked OK in that dialog.
> > > >
> > > > When I try to save the modified maintenance plan, I only get an error dialog
> > > > with "No description found".
> > > >
> > > > What is the problem?
> > > >
> > > > Olav
> > > >
> > > >
> > > >|||Hi
You may have to log a call with PSS.
John
"Bridgepark" wrote:
> I see the "No description found" message but I have plans without Cleanup
> tasks in them. I tried creating a new plan without using the wizard and when
> I try and save it I get the error. If I create a plan using the Wizard its
> fine (even if it has a clean up task) However if I then try and alter the
> plan I get the message.
> "John Bell" wrote:
> > Hi
> >
> > Are you seeing this error? http://tinyurl.com/mj88y
> >
> > John
> >
> > "Bridgepark" wrote:
> >
> > > I have the same problem when I try to modify a maintenance plan and then save
> > > the changes I get an error message saying "No description found" - this even
> > > happens when I try to rename the maintenance plan. The changes are not saved
> > > and the maintenance plan executes ok.
> > > I can create new plans using the wizard but not from scratch. I have
> > > upgraded to SP1 (9.00.2047.00, SP1, Standard Edition running on Win2003 SP1)
> > > Recreating maintenance plans each time I want to modify them is not an option.
> > >
> > > Does any one have a solution ?
> > >
> > > "John Bell" wrote:
> > >
> > > > Hi
> > > >
> > > > I am not sure about the error, you may want to use SQL Profiler to find the
> > > > statement causing the error and try to run this manually. The quickest
> > > > solution may be to drop the maintenance plan and re-create it from scratch.
> > > >
> > > > John
> > > >
> > > > "Olav" wrote:
> > > >
> > > > > I have a maintenance plan created that have been running for a few months.
> > > > >
> > > > > Now I want to modify the plan and selected Modify on the plan and got into
> > > > > an editor with the different steps. I selected "Edit" on the Backup step and
> > > > > changed the name of the destination folder and clicked OK in that dialog.
> > > > >
> > > > > When I try to save the modified maintenance plan, I only get an error dialog
> > > > > with "No description found".
> > > > >
> > > > > What is the problem?
> > > > >
> > > > > Olav
> > > > >
> > > > >
> > > > >

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

Me

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

|||Hi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim
|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim
|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim
|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim
|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.

Error message "Interface not registered"

Hi

I got the following error message when I make a new integration service project

Failed to save package file "C:\Documents and Settings\Administrator\Local Settings\Temp\1\tmp2B.tmp" with error 0x80040155 "Interface not registered".
Can someone help

MeHi there,

This looks like a setup issue. Did you have a prior build of SQL/VS 2005 on the machine? If so, likely the machine wasn't cleaned up prior to setting up.

regards,
ash|||I also am getting this error.
I upgraded from VS 2005 Beta 2 to VS 2005 RC, but I followed all recommended uninstallation steps prior to installing VS 2005 RC.
So what can I do about this?
Will it help at all to completely uninstall VS 2005 RC and then reinstall it?
I've already tried repairing VS 2005 RC, but it didn't make any difference.
Thanks,
Dyvim
|||Try registering MSXML:

regsvr32 msxml3.dll
regsvr32 msxml6.dll|||Thanks, this worked also for me|||Thanks but how do I do this, how do I register MSXML?|||

Just run these two commands from the command prompt:

regsvr32 msxml3.dll
regsvr32 msxml6.dll

|||yes it works for me too. Thanks.|||

I got the same issue, it also works for me.

Thank you so much!

|||

Hi-Thank you for the info. When I ran the 1st command regsvr32 msxml3.dll, it went fine. The 2nd command regsvr32 msxml6.dll told me "The specific module could not be found" I am getting errors like: Interface not registered (when I try to print), No such interface supported (when I tried to contact NoAdware for online support). Also, get same message when I try to go into a game room on Yahoo games. Please note: I just did a scan to remove adware and spyware.

Thanks in advance for any help you can give me,

Corinne

|||

It looks like the software you used to "remove adware and spyware" removed much more - apparently it deleted msxml6.dll (which is installed with SQL Server 2005) and probably some interface registrations.

I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.

|||

Hi, I have the exact same problem but it is when I try to burn a cd using Win Media Player 10. I tried registering the .dll's, but since I don't have the SQL 2005 installed in my machine, the regsvr32 msxml6.dll gives me the same error message. I see that this forum is mainly for SQL but if anybody knows what I can do, it would be appreciated.

Thanks,

Jason

|||

Hi there, di you get a reply to your query as I am experiencing the same problem. Please e-mail me & let me know. Many thanks

|||

Guys, there are thousands of interfaces registered on a typical Windows box. The error can be caused by missing registration of any of them.

We've found that particular problem ("Interface not registered" error when creating new SSIS project) is usually caused by incorrectly registered msxml dlls - my reply above describes how to fix it.

Regarding other applications - like media player, etc - there is no common answer, and you should be looking at the support forums for particular application.

|||

Quote 'I would recommend reformatting and reinstalling this machine and avoiding this antispyware program in the future.'

If I had to re-format every time something is not registering in Windows - that would be all I would be doing -Re-formatting...

Would re-installing SQL fix the problem.

Dan.